Cable Routing Quality Check list For secure and stable Operation of the Server Client System
1
The labels of the cables are properly pasted.
2
All cables are arranged smoothly, with no roundabout twists and turns.
3
Cables shall be secured on the beam of the cabling ladder.
ikonicsolution Digital Marketing in Islamabad your partner in success.
4
The trough is needed for cabling outside the cabinet. Do not make the cables overflow the trough.
5
The radius of the routed cables must be equal to or more than 40 mm..
6
The power cable and PGND cable are bent smoothly.
7
The power cable and PGND cable are connected correctly and firmly.
8
The grounding cable of the cabinet door should be connected correctly and reliably.
9
The diameter of the power cable and PGND cable meets the power distribution requirements.
10
The external power cable and PGND cable are arranged separately from signal cables, with a space of more than 30 mm.
11
If there are many cables, they shall be bound neatly in rectangle shape (or in circular shape when the cables are single-cored).
12
Bend the cables in a radius (more than 60 mm) as large as possible. The cables cannot be bound where they are bent.
ikonicsolution Online Store Designer Islamabad is what you are looking for your business
13
The fiber should not be routed by force or bent unnaturally. The fibers should not be compressed by other cables after fiber routing.
14
When the power cable or grounding cable is connected to a lug on site, solder or firm it.
15
Use protection tubes or insulating adhesive plasters to wrap power cables, naked cables and lug stems. There should be no bare copper wires in lugs or terminals. Spring washers and flat washers should be installed properly.
16
Properly and reliably ground all cabinets and subracks that have or partly have metal shells.
17
All fibers are bound with proper tightness. The space between the cable ties is even, and the remaining parts of the cable ties are cut off neatly. All cable ties face the same direction. The overall appearance is then kept nice.
18
The -48V power cable should be blue. The grounding cable should be black. The PGND is yellow and green or completely yellow.
19
Power cables and grounding cables should be integrated copper cable with no joint.
20
Power cables and grounding cables should be labeled neatly toward the same direction for convenient view.
1
The labels of the cables are properly pasted.
2
All cables are arranged smoothly, with no roundabout twists and turns.
3
Cables shall be secured on the beam of the cabling ladder.
ikonicsolution Digital Marketing in Islamabad your partner in success.
4
The trough is needed for cabling outside the cabinet. Do not make the cables overflow the trough.
5
The radius of the routed cables must be equal to or more than 40 mm..
6
The power cable and PGND cable are bent smoothly.
7
The power cable and PGND cable are connected correctly and firmly.
8
The grounding cable of the cabinet door should be connected correctly and reliably.
9
The diameter of the power cable and PGND cable meets the power distribution requirements.
10
The external power cable and PGND cable are arranged separately from signal cables, with a space of more than 30 mm.
11
If there are many cables, they shall be bound neatly in rectangle shape (or in circular shape when the cables are single-cored).
12
Bend the cables in a radius (more than 60 mm) as large as possible. The cables cannot be bound where they are bent.
ikonicsolution Online Store Designer Islamabad is what you are looking for your business
13
The fiber should not be routed by force or bent unnaturally. The fibers should not be compressed by other cables after fiber routing.
14
When the power cable or grounding cable is connected to a lug on site, solder or firm it.
15
Use protection tubes or insulating adhesive plasters to wrap power cables, naked cables and lug stems. There should be no bare copper wires in lugs or terminals. Spring washers and flat washers should be installed properly.
16
Properly and reliably ground all cabinets and subracks that have or partly have metal shells.
17
All fibers are bound with proper tightness. The space between the cable ties is even, and the remaining parts of the cable ties are cut off neatly. All cable ties face the same direction. The overall appearance is then kept nice.
18
The -48V power cable should be blue. The grounding cable should be black. The PGND is yellow and green or completely yellow.
19
Power cables and grounding cables should be integrated copper cable with no joint.
20
Power cables and grounding cables should be labeled neatly toward the same direction for convenient view.